What is the iron frame ultrasonic cleaning machine

Iron frame ultrasonic wave in the liquid propagation, so that the liquid and cleaning tank in the ultrasonic frequency vibration together, the liquid and cleaning tank vibration has its own inherent frequency, this vibration frequency is the frequency of sound waves, so people hear the humming sound. With the continuous development of the cleaning industry, more and more industries and enterprises use the ultrasonic cleaning machine.

ultrasonic cleaner

The advantage of the iron frame ultrasonic cleaning machine is that the ultrasonic cleaning effect is good and simple to operate. The sound people hear is the frequency of 20-20000Hz acoustic signal, higher than 20000Hz acoustic wave called ultrasonic, acoustic transmission in accordance with the sine curve longitudinal propagation, producing a large number of small bubbles . One reason is the local tensile stress in the liquid and the formation of negative pressure, the reduction in pressure so that the original dissolved in the liquid gas supersaturation, and escape from the liquid, becoming a small bubble; another reason is the strong tensile stress to the liquid “tear” into a hole, known as cavitation.

ultrasonic cleaner

how to carry out routine maintenance

1, pay attention to power safety. Use the power supply and power cord in accordance with the specifications of the equipment, the user’s side of the power circuit must be installed exclusively in the air switch for the cleaning machine in order to cut the cleaning machine power when needed. Because this equipment and water, corrosive (swelling) liquid contact, easy to cause leakage, please connect the grounding wire according to safety requirements.

2、Use regular detergent. Equipment using non-flammable detergent, do not use flammable and explosive substances as detergent, the use of equipment in the need to ensure that away from the occasion of flammable and explosive substances, the user must use certain substances under special circumstances, must consult the Division to confirm the safety, and make the corresponding safety measures. I suggest you have a look granboultrasonic cleaner. It can be used in medical equipment

3. Pay attention to moisture protection. Take care not to splash water on the electrical control box and related electrical components, and keep them away from water vapour, corrosive gases, dust, etc. The absence or insufficient level of liquid in the cleaning tank will cause irreversible damage to the equipment, so ensure that the tank is filled with sufficient cleaning liquid when in use, otherwise the relevant electric heaters, pumps and ultrasonic vibrators may be damaged and may lead to fire and personal injury.

ultrasonic cleaner

4. Clean frequently. When the equipment is not used for a long time, please release the cleaning liquid, dry the inner tank and the surface and then protect it with a film to prevent the corrosion of the equipment aging faster. Keep the workplace of the equipment ventilation, dry, clean, conducive to the long-term efficient operation of equipment and optimize the working environment conditions.

The above is a small introduction to the iron frame ultrasonic cleaning machine of the daily maintenance of the method, the first must pay attention to the safety of the power supply, followed by the use of formal cleaning agents, the third must pay attention to moisture, and finally, must be often cleaned to extend its trial period.